Fulltext results:
- Damasko DA36 @public:miscellany:watches:damasko
- 0 | DK36 at Damasko]] My watch developed a fault after a couple of years but this was easily repaired by... sko. I //might// have introduced the fault myself after opening it up a few times to regulate it - perhap... I don't know. It's now working perfectly well after 2½ years of continuous daily wear. I only take it... strong, very well designed and very well made. After time though the lack of adjustment (even //with//
- MB7AZE SvxLink Config @public:radio:topics:svxlink
- 1000 CW_WPM=20 LONG_IDENT_INTERVAL=60 #IDENT_ONLY_AFTER_TX=4 #EXEC_CMD_ON_SQL_CLOSE=500 EVENT_HANDLER=/us... NT_INTERVAL=10 LONG_IDENT_INTERVAL=60 #IDENT_ONLY_AFTER_TX=4 #EXEC_CMD_ON_SQL_CLOSE=500 EVENT_HANDLER=/us... N_ON_SEL5=01234 #OPEN_SQL_FLANK=OPEN #OPEN_ON_SQL_AFTER_RPT_CLOSE=10 IDLE_SOUND_INTERVAL=3000 #SQL_FLAP_S... ble long_announce_file "" # # The ident_only_after_tx variable indicates if identification is only t
- GM4SLV Allstar 2025 @public:radio:topics:allstar
- user, ; ; try again after 30 seconds ;tailmessagelist = msg1,msg2 ; list... ywait = 200 ; Time to wait after unkey before sending CT's and link telemetry call... r 12.8 for 20 volts). ; scalepost = offset to add after dividing with scalediv ; ;face = range(X-Y:word,X... nf </code> ++++ ++++ /etc/asterisk/rpt.conf after bridging added | <code bash> ; Radio Repeater c
- DM41X Info @public:calculator:info
- : <code> -42.47 </code> ==== Update 28/5/22 ==== After a period of observation the rate is now over-corr... 3ppm | |23/01/26| 24/01/26 | +2.6 | -0.1 | -0.1 | After 24 hours | |23/01/26| 26/01/26 | +3.0 | +0.2 | +0.1 | After 3 days | |23/01/26| 27/01/26 | +3.2 | +0.3 | +0.1 | After 4 days | |23/01/26| 04/02/26 | +5.0 | +0.2 | +0.2
- Damasko DA36 Tests 2 (2019) @public:miscellany:watches:damasko
- covery? Due to hand-winding feeding power through after an hour or so? ↓ __ 10/11/19 : 17:30 Dial u... → 05:45 ==== Day 3 : Tuesday 12 Nov 2019 ==== after overnight on [[..:watchwinder_python_code|]] ... 1/19 05:45 280 288 264 261 264 267 271 +2.0 good after night on winder 12/11/19 08:00 280 292 260 263 2... 1/19 05:45 290 288 266 273 269 282 278 +1.8 good after night on winder 13/11/19 10:45 280 283 260 272 2
- Svxlink & Echolink @public:radio:topics:svxlink
- =800 CW_WPM=20 LONG_IDENT_INTERVAL=60 #IDENT_ONLY_AFTER_TX=4 #EXEC_CMD_ON_SQL_CLOSE=500 EVENT_HANDLER=/us... NT_INTERVAL=10 LONG_IDENT_INTERVAL=60 #IDENT_ONLY_AFTER_TX=4 #EXEC_CMD_ON_SQL_CLOSE=500 EVENT_HANDLER=/us... N_ON_SEL5=01234 #OPEN_SQL_FLANK=OPEN #OPEN_ON_SQL_AFTER_RPT_CLOSE=10 IDLE_SOUND_INTERVAL=3000 #SQL_FLAP_S... =800 CW_WPM=20 LONG_IDENT_INTERVAL=60 #IDENT_ONLY_AFTER_TX=4 #EXEC_CMD_ON_SQL_CLOSE=500 EVENT_HANDLER=/us
- Becoming Teetotal @public:blog
- y 2017 - but regretted it. Regretted giving in. After a heart-attack in 2018. After developing Rheumatoid Arthritis in 2019. Being on a bucket-load of medications. After the 2020 Covid-lockdown-shielding-wine-o'clock adventure. After all that.... Enough was enough, and I stopped ag
- DM15L Info @public:calculator:info
- eriod | |23/01/26| 24/01/26| -47.0 |+2.1 | +2.1 | After 24 hours | |23/01/26| 26/01/26 | -43.4 | +1.9 | +2.0 | After 3 days | |23/01/26| 27/01/26 | -41.9 | +1.8 | +1.9 | After 4 days. LF15C loaded after time check | |23/01/26| 11/02/26 | -11.2 | +2.0 | +2.0 | After 19 days. DM15_
- Damasko DA36 Daily Rates (2016-2019) @public:miscellany:watches:damasko
- .9 23/08/17 -25.7 -2.5 Seems consistent < -2 s/d after 9 months daily wear 24/08/17 -28.5 -2.8 25/08/17 ... +0.0 -3.6 11/09/17 -1.0 -1.0 12/09/17 -4.0 -3.1 after dial up 24 hours. manual wind 20 turns. 14/09/17 ... 1st attempt to regulate → __ 20/12/17 +22.1 +4.0 after regulation and dial-down overnight 21/12/17 +22.5... ecovery..... 17/07/18 -12.7 -6.7 first day back after 2 month break. 20 months old 18/07/18 -15.0 -2.5
- Diaries @public:blog
- rted in 1992, my mid-20's but then I let it lapse after a few inconsistent years of intermittent diary wr... y first bullet journal entry 22 February 2016}} After about a year of this small //A6// format *bullet-... y of the previous day, usually between 2-5 pages, after the bullet-sketch-quick-view page(s) * I stick ... Project]] ==== Anne Lister ==== Now well known after the BBC dramatization as "Gentleman Jack" - Anne
- Desk15 - firmware for the DM15 @public:calculator:3rd
- pc21isp <firmware.hex> /dev/ttyUSB0 115200 12000 After starting this command press the reset button on the backside of the calculator with a paperclip. After the flashing procedure ends you might need to res... ent amounts). PLease note that entering decimals (after pressing ".") always "shifts the pressed number k... Edit line but split line at cursor position after editing * Join two lines - BSP Dele
- LF15C - firmware for the DM15 @public:calculator:3rd
- en it be possible to flash and run LF15C directly after DM15 V34 with no problems. I've also seen the pr... ar it in mind if you have problems starting LF15C after flashing it on top of V33-onwards </note> The ne... tool * The same caveats regarding installation after using the Swiss Micros V33 apply * **First do... ''GSB I'' in LBL B instead of ''GTO'' means that after running LBL A (via indirection) execution returns
- DM32 Info @public:calculator:info
- M32 v2.11: 2025-12-05 === Fixes Fixed: crash after using equation solver with Flag-11 (forum) Fo... preted as '1' Fixed: Message triangle cut-off after File->Load Clean State Fixed: Left/right scro... Fixed: Wrong CLEAR menu in PRGM and EQN mode after elaborated key combinations SHOW hold isn't k... also fixed a problem with restarting integration after an overflow Fixed: Memory corruption in EQN l
- Damasko DA36 Tests 1 (2019) @public:miscellany:watches:damasko
- === 16:00 1/11/19 (Full Power) & 07:45 2/11/19 (After overnight resting dial-up) <code> M1 -5 M2 -5 Mea... 1/19 14:20 256 -4 !!! Low amplitude all positions after several hours on wrist. Goto [[DA36Tests2]]... w period started 06/11/19 12:32 -5.4 -7.4 -7.4 after ~6 hours 06/11/19 20:02 -6.2 -2.5 -4.6 after further 7.5 hours 07/11/19 05:55 -6.1 +0.2 -2.6 overn
- AntiX @public:computers:archive
- nfigure software, and save files etc. that remain after rebooting. This required setting up persistence :... '' and ''rwhod'' to confirm new packages remained after reboot. I needed to change the default Live-USB u... w persistence to work - the first time I rebooted after setting up persistence I was forced to do so. I a... o ''~/.desktop-session/startup'' === Update=== After a couple of hours of using AntiX for Websurfing,